Engine Oil Flush 20L - Nulon

Nulon Trade Strength Oil System Cleaner is formulated to safely dissolve and dislodge sludge, carbon deposits and other harmful combustion by-products that accumulate within an engine’s lubrication system during normal operation.

Unleaded petrol, very much higher operating temperatures, increased power output and extended oil change intervals all contribute to oxidation and sludge formation. As a result, engine oils have more to cope with and are under much more stress than ever before. Built-up engine deposits are the greatest cause of failure in modern engines.

Environmental pressure and consumer demand have brought about extended oil change intervals. Manufacturer’s recommended oil change intervals are for vehicles that operate under ideal conditions. Few vehicles operate under such conditions, which mean that the oil’s additives degrade quicker; hence the oil should be changed more frequently. However, this does not happen and increased sludge and carbon forms as a result.

It makes absolutely no sense to add clean oil to a dirty engine. When added to the crankcase prior to an oil and filter change, Nulon Trade Strength Oil System Cleaner greatly assists in ridding the engine of potentially damaging contaminants. Nulon Oil System Cleaner also helps to free sticky hydraulic valve lifters. Thermal efficiency of the engine is also improved by ridding the engine of insulating sludge build-up. Oil System Cleaner provides a cleaner environment for fresh oil to operate in, so the detergent, dispersant and anti-oxidant additives in the new oil are not depleted as quickly.

Caution: Do not use this product in an engine that is known to have excessive sludge and carbon build-up. Carbon particles flushed from the top of the engine into the sump may not drain out. In such cases the oil pick-up will be heavily contaminated and picking up the extra loose carbon which may block the pick-up completely.

Benefits:

• Dissolves sludge in oil strainer screens
• Safely cleans soft carbon and sludge
• Helps free-up sticky piston rings
• Provides a cleaner environment for new engine oil, when used as directed
• New oil stays cleaner for longer

• Suitable for petrol, gas and diesel engines

• Safe to use in older engines

• Will not harm oil seals or gaskets

Add 300ml per 6 litres of engine oil capacity. Start engine and idle for 10 to 15 minutes to allow product to dissolve and dislodge sludge deposits. Change the oil and filter after the use of this product.

Note: For an engine contaminated with heavy sludge; inspect oil pick-up after cleaning.

INGREDIENTS:

• Naphtha petroleum, heavy, hydrodesulfurised, 64742-82-1, 30-60%
• Solvent naphtha petroleum, heavy aromatic, 64742-94-5, 30-60%
• Nonhazardous additives, proprietary, N/A, 30-60%

NOTE: Manufacturer has supplied full ingredient,
information to allow CHEMWATCH assessment.

HAZARD CODES/STATEMENTS:

Combustible liquid. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness and cracking.

PRECAUTIONARY STATEMENTS:

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only outdoors or in a well-ventilated area. Avoid breathing mist/vapours/spray. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection.

IF SWALLOWED:
Immediately call a POISON CENTER or doctor/physician. Do NOT induce vomiting. In case of fire: Use alcohol resistant foam or normal protein foam for extinction. Call a POISON CENTER or doctor/physician if you feel unwell. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/container in accordance with local regulations.