White Rust Not Anti-Corrosive Epoxy Paint 4L - HiChem

White Rust Not Anti-Corrosive Epoxy Paint 4L - HiChem

A single pack epoxy enamel for the decoration and protection of new and old metal surfaces. For interior and exterior application. Used for decorating items such as wrought iron, metal structures, railings, garden furniture, gutters, downpipes, fences, gates and tools. Suitable on a variety of metal surfaces such as mild steel, galvanised and zinc coated steel, aluminium, after application of suitable primer. Also suitable on surfaces such as timber and concrete after application of a suitable primer or undercoat. Provides a durable corrosion and abrasion resistant high gloss finish. Easily applied by brush, roller or spray.
DIRECTIONS: Stir thoroughly before use.
Surface Preparation: Remove all mill scale, rust and old flaking paintwork by wire brush, grinding and/or sanding. It is desirable to sand the whole surface. Remove all the gloss from previously painted areas by sanding with 280 400 grit abrasive paper. Clean surface with Mineral Turps to
remove all traces of wax, grease, silicone, oil and dirt.
Steel: No primer is required for (a) steel under mild service conditions or for interior use or (b) whe We steel is rust free or only lightly rusted. However, for superior protection of steel surfaces prime with HiChem Metal Primer, HiChem Cold Gal or HiChem Super Etch Primer. For heavier rust or if rust
cannot be removed treat with Rust Converter & Primer Sealer then prime with Metal Primer. Non Ferrous Surfaces: For adhesion to zinc coated or galvanised steel use Super Etch Primer or Galvanised Iron Primer. For other metals such as aluminium, copper and brass prime with Super
Etch Primer.
Timber: Prime with Oil Based Primer for Wood.
Thinning: Brushing-thin with up to 5% by volume Mineral Turps if required. Spraying-thin with up to 15% Enamel Thinner E250 or Mineral Turps.
Application: Apply 2 coats by brush, roller or spray. Apply first coat then allow to dry for minimum of 16 hours at 20°C allow longer at lower temperatures. Sand lightly then apply a second coat. Avold
application in damp conditions or when temperature is less than 10°C.
Coverage: Approx 15 square meters per litre.
Drying dry 24 hours. Recoat after 16 hours.
Cleanup: Use Enamel Thinner E250.
For further information refer to the Product Information Sheet.
Storage: Store in a cool dry place. Always replace the lid securely after use.
SAFETY:
Risk: Flammable. Harmful by inhalation and if swallowed. Irritating to skin.
Safety Directions: Avoid contact with the skin and eyes and avoid breathing the vapour. Wear protective clothing, safety glasses and gloves. Keep away from sources of ignition-no smoking. Do First Aid: For advice contact a Poisons Information Centre (Phone 13 11 26) or a doctor. If swallowed
not empty into drains.
do NOT induce vomiting.
Spills/Leaks: Collect on earth, sand or absorbent material.
Fire: Use dry chemic, foam, or carbon dioxide to fight fire.
For additional information refer to the Material Safety Data Sheet.