Description:
- A unique coating formulation for the restoration or complete colour change of worn or dull vinyl, plastic and low pile carpets.
- The colours are light fast and will not fade, chip or peel.
Uses:
- Ideal for automotive and marine vinyl interiors and tops.
- May be used on convertible tops and dashboards as well as seats and other vinyl trims.
- Non automotive uses include furniture, luggage, handbags, sporting goods, and more.
Properties:
- Primer and finish coat in one.
- Satin finish
- Extremely flexible
Suitable Substrates:
- Soft and hard vinyl Plastic.
- Some plastic may require priming with Flexiprime.
Surface Preparation:
- Thoroughly cleaning with Motospray Car clean to remove all traces of wax, grease, silicone, oil, and dirt.
- Allow surface to dry thoroughly. Check carefully as some vinyls are porous and absorb moisture.
- Vinyl Spray can be applied direct onto vinyl surfaces.
- Plastic surfaces should be primed with Flexiprime to ensure good adhesion.
Application:
- Mask off surrounding areas to avoid over spray.
- Shake can vigorously for one minute after the sound of agitator is heard.
- Spray in even overlapping pattern from a distance of approximately 20-25 cm.
- Apply several light coats leaving 5-10 minutes drying time between coats.
- Avoid heavy application.
- Turn can upside down and spray briefly to clear nozzle after use.
Drying Time :
- Touch dry in approx. 5-15 minutes depending on temperature.
- Hard dry in approx. 24 hours.
- Allow full 24 hours before using the coated item.
Coverage:
- Up to 3 square metres per can.
Cleanup:
- Use Superglow Multipurpose Thinner.
